Hobby Mio 3D Printed Masking Tape Storage Box

Hobby Mio 3D Printed Masking Tape Storage Box

Overview

Hobby Mio’s 3D Printed Masking Tape Storage Box is a dedicated holder for hobby masking tapes. It combines storage and cutting in one unit: the tape is kept inside the case to reduce dust, and can be pulled out and cut using the built-in cutting edge.

The case uses a magnetic top cover so you can open and swap masking tape quickly. A small transparent window on the cover lets you see the remaining tape at a glance.

Three sizes (S / M / L) are available to match different tape widths.

Specifications

• Product name: HOBBYMIO创意工坊系列 3D打印 遮盖带收纳盒
• Material:
  
• Degradable PLA
• High-strength PETG (cutting edge)
• Transparent PVC (window)
  
• Outer size (all versions):
  
• Approx. 72 mm (height) × 81 mm (length)
• Supports maximum masking tape outer diameter: 63 mm
  
• Supported tape width:
  
• S size: up to 14 mm wide masking tape
• M size: up to 24 mm wide masking tape
• L size: up to 30 mm wide masking tape
  
• Inner core options (each product includes both “large” and “medium” cores):
  
• Large core:
  
• Outer diameter: 37.0 mm
• Inner diameter: 28.6 mm
• Height:
  
• S: 13.4 mm
• M: 25.4 mm
• L: 31.4 mm
  
• Medium core:
  
• Outer diameter: 26.4 mm
• Inner diameter: 25.2 mm
• Height:
  
• S: 13.4 mm
• M: 25.4 mm
• L: 31.4 mm
  
• Standard core (box body integrated):
  
• Outer diameter: 24.9 mm
  

Key Features

• Closed storage
  
• Helps reduce dust on the masking tape surface, which can affect adhesion and masking performance.
  
• Magnetic top cover
  
• Strong magnets hold the lid; opening the cover allows quick tape replacement.
  
• Viewing window
  
• Transparent window shows how much tape remains.
  
• Three axle-core diameters
  
• Exchangeable inner cores allow the case to fit different brands and core sizes of masking tape.
  
• High-strength PETG cutting head
  
• PETG cutting edge is shown cutting masking tape in three steps (pull, press, cut).
  
• Three size options (S / M / L)
  
• Select according to the maximum width of the masking tape being used.
  

Recommended For

• Storing and using model masking tapes on the workbench
• Builders who want to keep tape cleaner and cut strips from a compact case
• Users with different tape core sizes or brands who need interchangeable cores

Personal Note (From Ah Chong)

This storage box is designed specifically around hobby masking tape: enclosed body, quick magnetic lid and a PETG cutting edge. With S / M / L choices and interchangeable cores, it looks practical if you keep a few different tape widths on the table and want them protected from dust while still ready to use.

Domestic Shipping
- FREE SHIPPING to Peninsular Malaysia on orders above RM300.
- Flat rate RM9 to Peninsular Malaysia for the first 5kg.
- Flat rate RM15 to Sabah & Sarawak for the first 1kg.

International Shipping
- Shipping cost is calculated based on parcel volumetric weight.
- For international orders, shipping will be quoted after packing.
- No payment is required until you confirm the final shipping cost.

See our Shipping Policy for details on shipping methods, costs and delivery times, click here.

International shipping (important):
Shipping on the estimator page is an estimate. For overseas orders, you may place your order first —
no payment is required until we confirm the final DHL shipping quotation with you.

Quick weight guide (rough estimate)

• HG / RG (single kit): approx. 1.5–2.5kg
• MG (single kit): approx. 3.0–5.5kg
• Tools: add weight quickly

Final shipping is based on actual weight or volumetric weight (box size matters).

View full DHL zone & price estimator